tire pressure BMW 7 SERIES LONG 2008 E66 Service and warranty information
Page 9 of 54
Standard operations
Maintenance work:
Brief diagnostic test
Verify Check Control messages
Check indicator and warning lights
Reset CBS display
Engine oil
Maintenance work:
Change the engine oil and oil filter. We rec-
ommend BMW High Performance 5W-30
Synthetic Oil P/N 07 51 0 017 866.
After every 3rd engine oil change: Intake air
cleaner: replace air filter element (reduce
replacement interval in dusty operating
conditions).
Parking brake: check function
Microfilter
Maintenance work:
Automatic air conditioning: Replace microfilter
Front brake
Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness, if
necessary replace at extra charge.*
Rear brake
Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness, if
necessary replace at extra charge.*
Parking brake: Check condition, brake lining
thickness and function, if necessary replace
at extra charge.*
*Unless covered by Maintenance Program
Vehicle Check
Maintenance work:
Check operation of horn, headlight flasher
and hazard warning flashers.
Check instrument and control lighting and
heater/air-conditioning blower.
Check lighting system: turn signals, back-up,
license plate, interior (incl. map, reading
lights), glovebox, flashlight, luggage area
lights.
Safety belts: check condition and function.
Check windshield wiper and washer jet
positions.
Body: check for corrosion (except cavities).
Tires: check tread depth, wear pattern, outer
condition, inflation pressure (also spare tire). If
necessary, correct pressure (also spare).
Reset tire pressure monitor.
Battery: check state of charge (magic eye)
and charge if required.
Power steering reservoir: Check fluid level.
Visually inspect all SRS airbag units for torn
covers, obvious damage or attachment of
stickers.
Rear-view mirrors
Coolant: check fluid level and concentration.
Windshield washer and intensive cleaning
system: check protection level, fluid level, top
if necessary.
Brake system connections and lines: check
for leaks, damage and correct positioning.
Underbody, incl. all visible parts (i.e. transmis-
sion, rear axle, fuel lines, exhaust system),
check for damage, leaks and corrosion.
Steering components: check for clearance,
leaks, damage and wear.
Final Inspection: Road test with check of
–Brakes
– Steering
– Shock absorbers (visual)
– Gearbox
5
Page 44 of 54
California Emission Warranty Parts
List
The following components are covered for
defects by the California Emission Control Sys-
tem Limited Warranty for a period of 7 years or
70,000 miles, whichever comes first:
Component 750i 750Li 760Li
Cylinder Head Cover
Gasket Set ••
Engine Control
Module ••
Exhaust Manifold
Gasket ••
Exhaust Manifold
w/Catalyst ••
Fuel Expansion Tank
w/Carbon Canister ••
Fuel Injector •
Fuel Injector O-Ring •
Fuel Pressure
Sensor •
Fuel Rail •
Fuel Tank ••
High Pressure Fuel
Pipe •
High Pressure Fuel
Pump •
Intake Manifold
Gasket ••
Intake Manifold
System ••
Knock Sensor ••
Transmission
Control Unit ••
Torque Converter ••
Valvetronic Actuator •
Valvetronic Control
Unit ••
Valvetronic Eccentric
Shaft Sensor ••
Vanos (VVT)
Camshaft
Adjustment Unit ••
Notice
The “National Traffic & Motor Vehicle Safety Act
of 1966” requires manufacturers to be in a posi-
tion to contact the vehicle owners when a cor-
rection of a product defect becomes necessary.
Please fill in the attached postcard if you change
your address or purchase a used BMW.
Tire Warranty Statement
Tires are warranted by their respective manufac-
turer as detailed in the applicable tire manufac-
turers warranty statements. Instructions for
proper tire care and maintenance are contained
in the Owners Manual. Should you experience
difficulty in obtaining warranty service from a tire
manufacturer, your authorized BMW center will
assist you in resolving the difficulty.
40